Navigating the Thermal Maze of Printed Circuit Boards

Monday, September 25, 2023 - 12:40

Technology

Navigating the Thermal Maze of Printed Circuit Boards

The right choice of materials for thermal management in electronic assemblies can have a crucial impact on the stability and performance of devices. In this article, we will focus on five main groups of materials that can be used to address temperature-related issues and their application in various scenarios. Read on to discover how to make the correct choices and utilize thermal pastes, bonding materials, encapsulation resins, thermally conductive gap fillers, and phase-change materials to ensure optimal thermal performance in electronic assemblies.

Thermal stability

Thermal management is a critical factor in ensuring the stability and reliability of electronic assemblies. Selecting the appropriate material and its proper application can guarantee optimal temperature conditions, especially in high-performance applications or challenging operational environments. There is a wide range of materials available, depending on the specific requirements of the application. Therefore, it is essential to carefully consider the choice of material and method. In the following sections, we will explore five primary material groups for thermal management and their suitable uses.

Thermal Pastes: Thermal pastes are an ideal choice when it is likely that further assembly modifications will be performed. These pastes are based on various oils and offer a broad range of working temperatures. During application, it is crucial to ensure the thinnest possible layer and minimize excess to prevent oil leakage. The thickness of the paste layer affects the rate of heat transfer.
Bonding Materials: If minimal assembly modifications are expected, the use of bonding materials can be considered. These materials can cure, and it is essential to know the required curing time. Thoroughly mix them and apply to avoid air pockets between components.
Thermally Conductive Gap Fillers: Thermally conductive gap fillers are suitable for thicknesses exceeding 500 μm and can fill the space between components and heat sinks. When applying them, it is essential to ensure complete filling and eliminate air gaps.
Encapsulation Resins: Thermally conductive potting resins are designed to protect electronics in challenging conditions. They are often filled with thermally conductive fillers to enhance heat transfer.
Phase-Change Materials: Phase-change materials can change their state based on temperature. They are useful for temperature regulation in applications where adaptation to varying operational conditions is necessary.

Choosing the right material for thermal management is crucial for achieving optimal performance and reliability in electronic assemblies. Carefully consider the specific requirements of your application and select materials and methods accordingly. Thermal pastes, bonding materials, thermally conductive gap fillers, encapsulation resins, and phase-change materials offer diverse options for addressing temperature-related issues. Proper application of these materials ensures optimal temperature conditions and extends the lifespan of electronic devices.

Care to know more on the subject?
Connect with our specialists

Michaela Krňáková

marketing Gatema PCB

marketing@gatema.cz

IPC Class 3 has already been with us for quite some time, but officially now only since September

Monday, September 7, 2020 - 08:22

There are situations when the printed circuit boards need to perform its best in extremely difficult conditions. Usually in those when there is zero room for the smallest flaw or failure - typically in industries such as aviation, astronautics, medicine or automobile industry. That is why customers from such industries already today require practically exclusively PCBs qualifying for the IPC class 3 certification – a standard of a board undergoing in its entire production process several inspections and testing procedures. His industry expertise is shared with us by Mr. Zdenek Capal, a chairman of Gatema PCB a.s. company that is one of the top European leaders in the area of printed circuit boards production and thanks to its January acquisition of a German company Kubatronik it also frequently delivers highly advanced circuit boards for top global players in the industry.

Filling in gaps? With non-conductive paste and galvanic copper

Tuesday, September 22, 2020 - 11:32

The production of printed circuit boards is a fairly stable business. After all, major part of the production process is directly dependent on chemical and physical processes which are largely quite hard to bypass. That is the reason why flaws are being sought after in all the processes around it – in the implementation system, in optimization of capacity usage, in replacing older machines with new ones, in improving particular technologies. This was the topic of our discussion with Mr. Michal Horni, R&D Manager for Gatema PCB company. A company that is even in European standards considered to be the leader in the sphere of speed production of prototype printed circuit boards.

How to choose from the widest portfolio of surface finishing?

Monday, October 12, 2020 - 14:29

How to correctly choose the surface finishing of printed circuit boards? Whilst previously it was just enough to protect the board against corrosion and the base for all adjustments was plain copper, customers nowadays are able to select from a wide selection of various options. There are ever increasing demands on a higher frequency, extended lifespan and generally better resistance of materials. New technologies also enable boards designers a higher thickness of joints and smaller distances between individual components. In Gatema, at this time only, six different options of surface finishing are being offered. Unleaded and leaded HAL, immersion silver, immersion gold, chemical tin or galvanic nickel and gold.